GasAlertMicro
User Manual
Entering the Pass Code
If the pass code protected option is enabled and access to
the user options menu or calibration is attempted, the LCD
displays the following:
The LCD then immediately prompts for the pass code. The
following three screens display.
To enter the pass code, complete the following:
1. From
the
SEt-- COdE
screen, use
G
or
H
to scroll
to the correct pass code.
2. Press
C
to confirm the pass code selection.
3. If the pass code is correct, access is granted and
the LCD automatically displays the
FiniSh OPtionS
screen. Use
G
or
H
to scroll to the required user
option(s).
If the pass code is incorrect or the correct pass
code is not confirmed within 10 seconds, the LCD
displays an error message.
The detector returns to normal operating mode for
an incorrect pass code.
For a correct pass code not confirmed within 10
seconds, the following error messages displays.
26