26
AutoCube 8200 User Guide
Wedge Settings
The wedge function is used to send measurement data to an active application
(such as Notepad) by using a keyboard shortcut.
Note:
The wedge function is only available in manual measurement mode.
Set up the following options:
•
Enable Wedge
turns the Wedge function on.
•
Use
Data Transfer Hot Key
to create a keyboard shortcut that will be used to
send the data to the open application.
•
Use the
Define Data Points and Delimiter
field to specify which data is
transmitted and in what order. Use delimiters as separators between data
points. Available data points and delimiters are bar code, length, width, height,
weight, volume, dimension unit, weight unit, date and time, horizontal tab,
vertical tab, space, comma, and carriage return.
•
Select
Round up to next integer
if you prefer dimension (or weight, if a scale is
in use) to round up rather than be sent as a fraction. For example, if this field is
turned on for dimensions, a length of 2.5 inches would be transmitted as 3
inches.
To send measurement data using the Wedge function:
1. Measure an object (see
2. Once the measurements are taken and shown in the measurement panel, open
an application such as Notepad.
3. Press the
Data Transfer Hot Key
combination that you have selected in the
wedge settings.
4. The data is transferred to the open application.
