Honeywell Aquastat L8148A Product Data Download Page 1

Page: 1 / 12

PRODUCT DATA

60-2278-9

® U.S. Registered Trademark
Copyright © 2001 Honeywell • All Rights Reserved

L8148A,E,J

Aquastat® Relays

APPLICATION

The L8148 Aquastat® Relays are immersion type hydronic

controllers that combine high limit protection with switching

relay control of burner and circulator motors.

FEATURES

• All models are used with a 24 Vac thermostat.
• Models include special terminals for adding remote,

low limit temperature control.

• L8148E,J have terminals for adding zone valve system

wiring.

• L8148E models are available with plug for connecting

Aquastat¨ Relay directly to D892/M892 Vent Dampers.

• All devices include transformer to provide power for

the low voltage control circuit. Different models

provide switching of line, low, or millivoltage burner

circuit.

• Case available for horizontal or vertical mounting.
• Combinations of two insulation and two insertion well

lengths are available.

Horizontal

Mounting

Vertical

Mounting

Contents

Application ........................................................................

Features ...........................................................................

Specifications ...................................................................

Ordering Information ........................................................

Installation ........................................................................

Setting and Adjustments .................................................. 12

Operation .......................................................................... 12

Checkout .......................................................................... 12

http://waterheatertimer.org/Contactors-relays.html

Summary of Contents for Aquastat L8148A













Search results

Summary of Contents for Aquastat L8148A

Reviews:

Related manuals for Aquastat L8148A

Brands by name

Popular brands

Honeywell Aquastat L8148A, Product Data

Search results

Summary of Contents for Aquastat L8148A

Reviews:

Related manuals for Aquastat L8148A

Brands by name

Popular brands