Honeywell Ademco 8132, User Manual

Page: 10 / 80

About Symphony/Symphony-i (cont'd)
10
Symphony/Symphony-i "Arming" Screen
From the "Home" screen, press
Security
to access the Symphony/Symphony-i
"Arming" screen. Use this picture and the table that follows to become familiar with
the Symphony/Symphony-i security functions.
ITEM FUNCTION
Away
Press this button to arm when no one will be staying on the premises. When
armed in
Away , the system will sound an alarm if a protected door or window is
opened, or if any movement is detected inside the premises. You may leave
through the entrance door during the exit delay period without causing an
alarm. You may also re-enter through the entrance door, but must disarm the
system with your User Code within the entry delay period or an alarm will
occur.
Stay Press this button to arm when you are staying home, but might expect
someone to use the entrance door later.
When armed in Stay , the system will sound an alarm if a protected door or
window is opened, but you may otherwise move freely throughout the
premises. Late arrivals can enter through the entrance door without causing an
alarm, but they must disarm the system within the entry delay period or an
alarm will occur.
Night Press this button to arm when you are staying home and do not expect anyone
to use the entrance door.
Your installer may have configured Night Mode
differently; have him/her describe the actual settings of this mode.
Arm Multi-
Partitions
Check this box when you want to arm more than one partition. When Arm
Multi-Partitions is checked, all partitions within the system can be armed at one
time (if the user is so authorized). When the Arm Multi-Partitions circle does
not contain a check mark, each partition must be armed individually.
More Choices Press this button for to access Console Mode, show zone status, check the
event logs or to refresh your web information.