background image

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as being free 
of defective materials and faulty workmanship. Honeywell’s 
standard product warranty applies unless agreed to otherwise 
by Honeywell in writing; please refer to your order acknowl-
edgement or consult your local sales office for specific war-
ranty details. If warranted goods are returned to Honeywell 
during the period of coverage, Honeywell will repair or replace, 
at its option, without charge those items that Honeywell, in its 
sole discretion, finds defective. 

The foregoing is buyer’s sole 

remedy and is in lieu of all other warranties, expressed or 
implied, including those of merchantability and fitness for a 
particular purpose. In no event shall Honeywell be liable for 
consequential, special, or indirect damages.

While Honeywell may provide application assistance personally, 
through our literature and the Honeywell web site, it is cus-
tomer’s sole responsibility to determine the suitability of the 
product in the application.

Specifications may change without notice. The information we 
supply is believed to be accurate and reliable as of this printing. 
However, Honeywell assumes no responsibility for its use.

Installation and Technical Manual for the 

 

Summing In-Line Amplifier, Order Code AA919

ISSUE A 

 

  

008-0749-00

Notices and Trademarks

While this information is presented in good faith and believed 
to be accurate, Honeywell disclaims the implied warranties of 
merchantability and fitness for a particular purpose and makes 
no express warranties except as may be stated in its written 
agreement with and for its customers.
In no event is Honeywell liable to anyone for any indirect, spe-
cial or consequential damages. The information and specifica-
tions in this document are subject to change without notice.
Honeywell is a registered trademarks of Honeywell Internation-
al Inc.
Other brand or product names are trademarks of their respec-
tive owners.

COAX-SEAL

®

 is the registered trademark of Universal Electronics.

Scotch

®

 is the registered trademark of 3M. 

EthernNet/IP

®

 is the registered trademark of ODVA, Inc.

008-0749-00-A-EN   |   1   |   06/19
© 2019 Honeywell International Inc. All rights reserved.

For more information

Honeywell Sensing and Internet of 
Things services its customers through a 
worldwide network of sales offices and 
distributors. For application assistance, 
current specifications, pricing or the 
nearest Authorized Distributor, visit 
sensing.honeywell.com or call:

Asia Pacific  

+65 6355-2828

Europe    

+44 (0) 1698 481481

USA/Canada  

+1-800-537-6945

Honeywell Sensing and Internet of Things

9680 Old Bailes Road
Fort Mill, SC 29707 
www. honeywell.com

Summary of Contents for AA919















Reviews: