Honeywell 8680i Series, User Manual

Page: 109 / 252

8680i User Guide 95
Codabar Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters.
Default = Don’t Trans-
mit .
Codabar Check Character
Codabar check characters are created using different “modulos.” You can program
the 8680i to read only Codabar bar codes with Modulo 16 check characters.
Default = No Check Character.
No Check Character indicates that the 8680i reads and transmits bar code data
with or without a check character.
When Check Character is set to Validate and Transmit , the 8680i only reads Cod-
abar bar codes printed with a check character, and transmits this character at the
end of the scanned data.
When Check Character is set to Validate, but Don’t Transmit , the 8680i only reads
Codabar bar codes printed with a check character, but does not transmit the check
character with the scanned data.
Off
Transmit
* Don’t Transmit
* No Check Character
Validate Modulo 16, but
Don’t Transmit
Validate Modulo 16
and Transmit