Honeywell 5010, User Manual

Page: 133 / 199

9 - 1
9
OCR Programming
Use this section to program the Imager for optical character recognition (OCR).
The 2D OEM Engine reads 6 to 60 point OCR typeface.
Note: OCR is not as secure as bar codes. To enhance security in OCR
applications, create an OCR template to match the data, and print an
OCR check character.
The 2D OEM Engine will read OCR-A, OCR-B, U.S. Currency Serial Number
(Money), MICR E-13B, and SEMI fonts.
You can either select an OCR default, or create your own custom template for
the type of OCR format you intend to read. See "OCR" on page 9-1 for
programming codes that will enable your imager to read OCR-A, OCR-B, U.S.
Currency, MICR E-13B, or SEMI fonts. See "OCR Templates" on page 9-4 if
you want to create a custom “template,” or character string that defines the
length and content of OCR strings that will be read with your imager.
Note: Setting the template and check character options are essential for OCR
reading.
OCR Fonts
Default All OCR Settings turns off all OCR capability in the imager, so the
imager will be able to scan linear, stacked, matrix, and composite bar codes, but
not OCR fonts. In addition, any OCR templates you have created are erased.
The eight digit default templates are reinstated for any future use of the
OCR On
codes listed below.
< Default All OCR Settings >
OCR
Note: OCR symbols can misread when scanned sideways or upside down. Use
Working Orientation , page 4-25, if your OCR symbols will not usually be
presented upright to the scanner.
Only one OCR symbology can be read at a time.