Honeywell Sensing and Control
13
Limitless™ Series WLS Limit Switch
ISSUE 3
50054911
3.2
COUNTRY USE CODE “B” ANTENNA OPTIONS
Table 14 – Country Use Code B Antenna Options
COUNTRY CODE B
(Note: all columns are independent of each other)
Antenna Type
Code
(allowed
for use)
Integral Mount
Antennas
(al-
lowed for use)
Remote Mount
Antennas
(al-
lowed for use)
Magnetic Remote
Mount Assemblies/
Antennas
WAMM100RSP-005
WAMM100RSP-010
(allowed for use)
Extension Cable As-
semblies/Antennas for
Remote Moun
t
WCA200RSJRSP-002
WCA200RSJRSP-005
WCA200RSJRSP-010
WCA200RSJRSP-015
WCA200RSJRSP-020
(allowed for use)
Extension Cable As-
semblies/Antennas
for Remote Mount
00
WAN01RSP
WAN03RSP
WAN01RSP
WAN01RSP
WAN01RSP
01
WAN02RSP
WAN09RSP
WAN02RSP
WAN02RSP
WAN02RSP
02
WAN07RSP
WAN10RSP
WAN07RSP
WAN04RSP
WAN03RSP
03
WAN08RSP
WAN08RSP
WAN07RSP
WAN07RSP
05
WAN08RSP
WAN08RSP
10
WAN09RSP
11
WAN10RSP
WAN11RSP
Integral mount:
Antennas have an RP-SMA plug that connects directly to the WLS RP-SMA jack
Remote mount:
Remote mount antenna uses a cable with a RP-SMA plug that connects directly to the WLS RP-SMA jack (exception,
WAN06RNJ)
,
ATTENTION
If using the WLS in a portable application (for example, the WLS is used in a handheld device and the antenna is less than
20 cm from the human body when the device is in operation): The integrator is responsible for passing additional SAR
(Specific Absorption Rate) testing based on FCC rules 2.1091 and FCC Guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields, OET Bulletin and Supplement C. The testing results will be submitted to the FCC for approval prior to
selling the integrated unit. The required SAR testing measures emissions from the module and how they affect the person.
,
ATTENTION
The antenna cables should not be modified (i.e. cut short and/or re-terminated) as it may affect Communication Agency approval.
Notes for Section 3.1& 3.2 • Tables 13 and 14:
1. Antennas listed in this chart are approved for use with the Digi International XBee –PRO
®
RF Module which the WLS utilizes.
2. Industry Canada Compliance Statement: This device has been designed to operate with the antenna types listed in this
document, and having a maximum gain of 9 dBi. Antenna types not included in this list or having a gain greater than 9 dBi
are strictly prohibited for use with this device. The required antenna impedance is 50 Ohm.
