Honeywell 50054911, Installation Manual

Page: 16 / 30

12
Honeywell Sensing and Control
Limitless™ Series WLS Limit Switch
ISSUE 3
50054911
3 ANTENNA OPTIONS ALLOWED PER COUNTRY USE CODE
This section defines the antenna options that can be used in a particular country of interest; reference Section 2.1 for a list of Coun-
tries per Country Use Code. It is important to determine the country that the WLS will be used in. Thereby, noting the correct Country
Use Code in the WLS nomenclature will help ensure proper selection of antenna and/or cable options. The integral antenna mounts di-
rectly to the WLS RP-SMA jack while the remote antenna mounts to the WLS RP-SMA jack via a cable assembly (see Section 5.2.3.1).
Further technical information on the WAN Series antennas, WAMM Series magnetic mounts and WCA Series cable assemblies can be
found in Section 5.1.
m WARNING
The WLS must be installed in accordance with the requirements specified in this document in order to comply with the specific
Country Communication Agency requirements. (i.e. FCC, IC, ETSI, ACMA, etc.) See Section 3 as it requires choosing the correct
Country Use Code and thus allowable antenna and/or cable usage.
3.1 COUNTRY USE CODE “A” ANTENNA OPTIONS
Table 13 – Country Use Code A Antenna Options
COUNTRY CODE A
(Note: all columns are independent of each other)
Antenna Type
Code
(allowed
for use)
Integral Mount
Antennas
(al-
lowed for use)
Remote Mount
Antennas
(al-
lowed for use)
Magnetic Remote
Mount Assemblies/
Antennas
WAMM100RSP-005
WAMM100RSP-010
(allowed for use)
Extension Cable As-
semblies/Antennas for
Remote Moun
t
WCA200RSJRSP-002
WCA200RSJRSP-005
WCA200RSJRSP-010
WCA200RSJRSP-015
WCA200RSJRSP-020
(allowed for use)
Extension Cable As-
semblies/Antennas
for Remote Mount
WCA200RNPRSP-002
WCA200RNPRSP-010
(allowed for use)
00 WAN01RSP WAN03RSP WAN01RSP WAN01RSP WAN06RNJ
01 WAN02RSP WAN06RNJ* WAN02RSP WAN02RSP
02 WAN04RSP WAN09RSP WAN04RSP WAN03RSP
03 WAN05RSP WAN10RSP WAN05RSP WAN04RSP
04 WAN07RSP WAN11RSP WAN07RSP WAN05RSP
05 WAN08RSP WAN08RSP WAN07RSP
06 WAN08RSP
07 WAN09RSP
08 WAN10RSP
09 WAN11RSP
10
11
Integral mount:
Antennas have an RP-SMA plug that connects directly to the WLS RP-SMA jack
Remote mount:
Remote mount antenna uses a cable with a RP-SMA plug that connects directly to the WLS RP-SMA jack (exception,
WAN06RNJ)
* if
not
ordering as a replacement, you will also need to order a WCA200RNPRSP-002 or WCA200RNPRSP-010 cable assembly to
allow connection to a RP-SMA jack.