Honeywell 3800g, User Manual

Page: 27 / 156

3800g/3800gHD/3800gPDF User’s Guide 2 - 1
2
Terminal Interfaces
Terminal ID
If your interface is not a standard PC AT, refer to Terminal ID , beginning on page
2-1 and locate the Terminal ID number for your PC. Scan the Terminal ID bar
code below, then scan the numeric bar code(s) from the Programming Chart
inside the back cover of this manual to program the imager for your terminal ID.
Scan
Save to save your selection.
For example, an IBM AT terminal has a Terminal ID of 003. You would scan the
Terminal ID bar code, then 0 , 0 , 3 from the Programming Chart inside the back
cover of this manual, then Save . If you make an error while scanning the digits
(before scanning Save), scan the Discard code on the Programming Chart ,
scan the Terminal ID bar code, scan the digits, and the Save code again.
Note: After scanning one of these codes, you must power cycle your computer.
Terminal ID
Save