Configuring Event Settings
95
2.
Select the Channel to configure for heat mapping from the drop-down menu and check
the
Enable
check box.
3.
To set the periods when heat mapping is active, next to
Period
, click
Set
, and then follow
To set up motion detection periods
Configuring Face Detection Settings
The face detection feature analyzes the video to detect if there are any human faces
appearing in the video. If a face appears it will capture the face with either snapshots,
recordings, or alarms so it can be processed or analyzed further.
1.
Go to
Main Menu
SETTING
EVENT
Face Detection
.
Figure 8-21 Face Detection Configuration Screen
2.
Select the
Channel
to configure for face detection from the drop-down menu and check
the
Enable
check box.
3.
Check the
Face ROI
(region of interest) check box if you want a region of interest showing
the detected face to be displayed when an event occurs.
4.
Click
RULE
to open a video image to set the
Min Size
and
Max Size
of a face that will
trigger face detection. Use the mouse to drag and resize the Min and Max size boxes in
the video image.
5.
To set the periods when face detection is active, next to
Period
, click
Set
, and then follow
To set up motion detection periods
6.
Select the action(s) that you want the system to initiate when a face detection event
occurs:
Alarm Out:
Select the check box to activate the selected alarm output(s) (
1
or
2
). In the
Latch
box, specify the amount of time (0–300 s) to delay the alarm output signal after a
face detection event is triggered.
Alarm Upload:
Select the check box to enable the system to upload an alarm signal to the
network (including to an alarm center and/or web client).
Send Email:
Select the check box to enable the system to send an email notification. If
the
Snapshot
function is enabled, an image can be attached to the email. To set up Email,
see
Summary of Contents for 2450Cm Series
Page 2: ......
Page 27: ...Getting Started 13 ...
Page 28: ...Performance Series Network Video Recorder User Guide 14 ...
Page 29: ...Getting Started 15 ...
