Performance Series Network Video Recorder User Guide
68
Figure 7-7 Network DDNS Settings Window
2.
On the
DDNS
page, select the
Enable
check box to enable a DDNS network connection.
3.
In the
DDNS Type
box, select the DDNS service that you want to use.
4.
Depending on the DDNS Type you select, you may need to enter the following details:
Host IP:
The address appears automatically unless
DDNS Type
is set to
Private DDNS
. In
that case, enter the server IP address of your DDNS service provider.
Domain Mode:
If
DDNS Type
is set to
Honeywell DDNS
, click
Default Domain
to use the
default domain name or click
Custom Domain Name
to create your own domain name.
Domain Name:
Enter a domain name (if you are not using a default domain name).
You can obtain this from your DDNS service provider.
User Name:
If applicable, enter a user name to access your DDNS service.
5.
Click
Apply
to save your settings.
6.
If you want to save your settings and exit the
SETTING
menu, click
OK
.
7.
Restart the NVR for the new network connection settings to take effect.
8.
To test the settings, on the
DDNS
page, click
Test
.
Configuring Email Settings
1.
Go to
Main Menu
Setting
NETWORK
, the following window is displayed:
Summary of Contents for 2450Cm Series
Page 2: ......
Page 27: ...Getting Started 13 ...
Page 28: ...Performance Series Network Video Recorder User Guide 14 ...
Page 29: ...Getting Started 15 ...
