7
Home and Office Security Safes
6
Using the Emergency
Override Key
Using the Emergency Override Key
Your safe is equipped with an Emergency Override Key which
allows immediate access in case you forget your Passcode or the
batteries need replacing.
1. Remove the key lock cover located beneath
the digital keypad.
2. Insert one of the Emergency Override keys (2 included) into
the bypass lock and turn to the left.
3. Pull the handle up and pull open the safe door.
4. After re-programming (
See page 6)
or changing batteries
(See page 8)
, replace the key lock cover and store keys in a
safe and secure location away from the safe.
Programming a
Personal Passcode
For security reasons, it is very important that you program your own personal
Passcode into the digital lock. The factory Passcode
159A
s
hould be changed
immediately.
Programming Your Personal Passcode
1. Using the factory assigned Passcode
(159A)
, open the safe.
(
See page 2).
2. Locate and then press and release the small red memory
button located inside the safe on the edge of the lock
cover. The keypad will beep twice and the yellow LED will
light.
3. Select a Passcode using 3 to 8 numbers (no letters) and
enter it on the keypad.
4. After entering the numbers, press the B key. The keypad
will again beep twice and the yellow LED will light. This
will complete the programming of your personal Passcode.
Leave the door open and proceed to Testing Your New
Passcode.
Testing Your New Passcode
1. With the door in the open position, push the lock handle
into the closed position. In about 3 seconds, the safe will
automatically lock.
2. Enter your new personal Passcode onto the keypad followed
by the letter A and the digital lock should click open.
Example:
3. Pull the handle and open the safe.
4. If the new Passcode does not unlock the safe, then repeat
the steps to program your personal Passcode and retest.
Once programming is completed, write your personal Passcode
down and store it in a safe and secure place away from the safe. The
factory pre-set Passcode will no longer open your safe.
Important:
Your new Passcode will always consist of your selected number code followed by the
letter A.
B
0
8 9
7
A
6
5
2 3
1
4
Yellow
Light
Anti-Thef
t safe
D
IG
IT
A
L
E
LECTRON
IC
SAFE
B
0
8 9
7
A
6
5
2 3
1
4
Memory
Button
A
