Honeywell 1900GSR-2, User Manual

Page: 103 / 298

4 - 9
Presentation Mode
Presentation Mode uses ambient light to detect bar codes. The LEDs remain
off until a bar code is presented to the scanner, then the LEDs turn on automat-
ically to read the code. If the light level in the room is not high enough, Presen-
tation Mode may not work properly.
Note: If you are using a cordless charge base in Presentation Mode, the battery
will not charge unless the power supply is plugged into the base’s
auxiliary power port.
Presentation LED Behavior after Decode
When a scanner is in presentation mode, the LEDs remain on and continue
scanning for a short time after a bar code is decoded. If you wish to turn
the LEDs off immediately after a bar code is decoded, scan the
LEDs Off
bar code, below. Default = LEDs On.
Presentation Sensitivity
Presentation Sensitivity is a numeric range that increases or decreases the
scanner's reaction time to bar code presentation. To set the sensitivity,
scan the
Sensitivity bar code, then scan the degree of sensitivity (from 0-
20) from the inside back cover, and Save . 0 is the most sensitive setting,
and 20 is the least sensitive.
Default = 1.
Presentation Mode
* LEDs On
LEDs Off
Sensitivity