Honey Bee Grain Belt Plus 3055, Operator'S Manual

Page: 234 / 253

Honey Bee Manufacturing Ltd.
2007 Grain Belt Plus Supplement
Center Feed Auger
Auger Drive Assembly
Power is transferred from the combine to the header
via the header drive shaft. As the drive shaft turns,
power is transferred through the gear box, to the Eaton
variable pump assembly. This pump assembly has a
charge pump adapter, which uses the combine’s power
to pressurize or “charge” the hydraulic circuit for the
header.
Hydraulic oil is drawn out of the header’s reservoir, and
then sent through the hydraulic circuit, where it is used
to power the auger, knife, draper, and feeder deck
motors.
The linear actuator enables the operator to reverse the
flow in the hydraulic circuit for clean-out purpose
Rev. 01 - 04/25/08 13
Sub Frame Assembly - Auger Motor
Gear Box
Eaton
Variable
Pump
Auger Drive
Motors