Tyre Puncture
u
Removing Wheels
88
Tr
ou
bles
hoo
ting
Installation
1.
Install the side collar into the right side
wheel hub.
2.
Position the wheel between the fork legs
and insert the front axle shaft from the
right side, through the right fork leg and
wheel hub.
3.
Make sure that the lug on the left fork leg
is located in the slot of the brake panel.
4.
Tighten the front axle nut.
5.
Install the rubber cap onto the front axle
nut.
6.
Adjust the front brake lever freeplay.
2
P. 64
7.
After installing the wheel, apply the brake
lever several times and then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
8.
Install the speedometer cable securely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Lug
Slot
Torque:
44 N·m (4.5 kgf·m, 32 lbf·ft).
Summary of Contents for XL125L
Page 20: ...Motorcycle Safety 17...
