Engine Oil
u
Changing Engine Oil
60
Maintenance
3.
Turn the ignition switch off, stop the
engine and wait for 2 to 3 minutes.
4.
Place a drain pan under the drain bolt.
5.
Remove the oil fill cap/dipstick, drain bolt
and sealing washer to drain the oil.
u
Discard the oil at an approved recycling
centre.
6.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
7.
Fill the crankcase with the recommended
oil (
2
P. 45) and install the oil fill cap/
dipstick.
8.
Check the oil level.
2
P. 58
9.
Check that there are no oil leaks.
Torque:
30 N·m (3.1 kgf·m, 22 lbf·ft).
Drain bolt
Sealing washer
Required oil
When changing oil:
1.0 litres (1.1 US qt, 0.9 Imp qt)
Summary of Contents for XL125L
Page 20: ...Motorcycle Safety 17...
