Tyre Puncture
u
Removing Wheels
85
Tr
ou
ble
sho
otin
g
8.
Remove the rear axle shaft, drive chain
adjusters, side collars and rear wheel from
the swingarm.
Installation
1.
To install the rear wheel, reverse the
removal procedure.
2.
Tighten the rear axle nut.
3.
Tighten the brake stopper arm nut.
4.
Adjust the rear brake pedal freeplay.
2
P.
64
5.
Adjust the drive chain slack.
2
P. 70
6.
After installing the wheel, apply the brake
pedal several times and then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
A used cotter pin may not effectively secure a
fastener. Always replace a used cotter pin with
a new one.
Torque:
59 N·m (6.0 kgf·m, 44 lbf·ft)
Drive chain
adjusting nut
Drive chain adjuster
Rear axle
shaft
Drive chain
Drive chain lock nut
Torque:
22 N·m (2.2 kgf·m, 16 lbf·ft)
20 AFS110MD MCS (MA)-32K71A200.book Page 85 Wednesday, October 16, 2019 5:41 PM
