manualshive.com logo in svg

Honda Wave 110 2018, Owner'S Manual, Page: 90 / 113

Share
Download
Honda Wave 110 2018 Owner'S Manual Download Page 90

86

Tr

ou

ble
sho

otin
g

Electrical Trouble

Battery Goes Dead

Charge the battery using a motorcycle battery 

charger.

Remove the battery from the motorcycle 

before charging.

Do not use an automobile-type battery 

charger, as these can overheat a motorcycle 

battery and cause permanent damage.

If the battery does not recover after 

recharging, contact your dealer.

Burned-out Light Bulb

Follow the procedure below to replace a 

burned-out light bulb.

Turn the ignition switch to the OFF or LOCK 

position.

Allow the bulb to cool before replacing it.

Do not use bulbs other than those specified.

Check the replacement bulb for correct 

operation before riding.

For the light bulb wattage, see 

“Specifications.” 

2

P. 105

NOTICE

Jump starting using an automobile battery can damage 

your motorcycle's electrical system and is not 

recommended. 

Bump starting is also not recommended. 

17 AFB110MD MS (PH)-32K89C000.book  Page 86  Tuesday, February 21, 2017  9:38 AM

Summary of Contents for Wave 110 2018


















































































































Reviews:

No comments