Caring for Your Motorcycle
96
Infor
m
atio
n
#
Washing Precautions
Follow these guidelines when washing:
●
Do not use high-pressure washers:
u
High-pressure water cleaners can damage
moving parts and electrical parts, rendering
them inoperable.
u
Water in the air intake can be drawn into
the carburetor and/or enter the air cleaner.
●
Do not direct water at the muffler:
u
Water in the muffler can prevent starting
and causes rust in the muffler.
●
Dry the brakes:
u
Water adversely affects braking effectiveness.
After washing, apply the brakes intermittently
at low speed to help dry them.
●
Do not direct water under the seat:
u
Water in the under seat compartment can
damage your documents and other
belongings.
●
Do not direct water at the air cleaner:
u
Water in the air cleaner can prevent the
engine from starting.
●
Do not direct water near the headlight:
u
The headlights' inside lens may fog temporarily
after washing or while riding in the rain. This
does not impact the headlight function.
u
Any condensation inside the headlight
should dissipate after a few minutes of
running the engine with the headlight(s) on.
However, if you see a large amount of water
or ice accumulated inside the lens(es), have
your vehicle inspected by your dealer.
●
Do not use wax or polishing compounds on
mat painted surface:
u
Use a soft cloth or sponge, plenty of water,
and a mild detergent to clean mat painted
surfaces. Dry with a soft clean cloth.
Aluminium will corrode from contact with dirt,
mud, or road salt. Clean aluminium parts regularly
and follow these guidelines to avoid scratches:
●
Do not use stiff brushes, steel wool, or cleaners
containing abrasives.
●
Avoid riding over or scraping against curbs.
Aluminium Components
17 AFB110MD MS (PH)-32K89C000.book Page 96 Tuesday, February 21, 2017 9:38 AM