33
Cleaning the gear case:
If there is contaminated material such as grass, thread, mud, or dirt in
between the gear case, grass guard, and blade holder A, clean them
using the following procedure.
1.Stop the engine with the engine switch to the OFF position.
2.Remove the cutting blade. (See page 52)
3.Remove the blade holder A.
4.Remove grass, thread, mud, or dirt around blade holder A and the
drive bolt.
DRIVE BOLT
GRASS GUARD
BLADE HOLDER A
GEAR CASE
4EVR5600.book Page 33 Thursday, July 12, 2018 5:00 PM
