67
• Why does my MVCI beep every time the scroll pad is pressed?
This is normal operation. This audible beep can be disabled. See the
instructions for “Keybeep” in the MVCI System Setup section of this
User Guide.
• When using the menu functions, why does my MVCI return to
the Host Status display?
The MVCI will always return to the Host Status display after twenty
seconds of no scroll pad activity.
• When changing the wireless settings, why do the settings go
back to the previous value before they are saved?
The MVCI will always return to the Host Status display after twenty
seconds of no scroll pad activity. If this occurs, all wireless changes
made will be lost. All changes must be saved before the MVCI
automatically returns to the Host Status display.
• Why does the battery icon on the Host Status screen have an ‘X’
in it?
The batteries are not installed or are installed incorrectly in the MVCI.
The batteries may be defective.
The battery charging is automatically cut-off when prolonged use
causes the internal temperature of the MVCI to rise above 60 degrees
centigrade. Battery charging will resume once the MVCI power is
cycled (turned off and on) and temperature is below 60 degrees
centigrade. Refer also to the Battery Charger section of this User
Guide.
• How do I remove the wireless SD card?
NOTE: The wireless SD card and SD retainer clip should not be
removed unless directed to do so.
If instructed to remove the SD retainer clip (used to protect the wireless
SD card) and the wireless SD card, please follow these steps:
