Honda Sportrax 250X 2019 Owner'S Manual Download

Page: 106 / 223

Servicing Your Honda

Engine Oil

3. Pour the drained oil into a suitable container and dispose of it in

an approved manner (page 156).

NOTICE

Improper disposal of drained fluids is harmful to the environment.

Add Engine Oil:

1. Reinstall the oil drain bolt with the new sealing washer and

tighten it to the specified torque:

18 lbf·ft (25 N·m , 2.5 kgf·m)

2. Fill the crankcase with the recommended grade oil

approximately:

1.6 US qt (1.5 ℓ)

3. Reinstall the oil fill cap/dipstick.
4. Start the engine and let it idle for 3 – 5 minutes.
5. Stop the engine, wait 2 – 3 minutes and check the oil level. Make

sure the oil is between the upper and lower level marks on the oil
fill cap/dipstick. If necessary, add more oil but do not overfill.

6. Reinstall the oil fill cap/dipstick.
7. Check that there are no oil leaks.

If a torque wrench is not used for installation, see your dealer as
soon as possible to verify proper assembly.

19 TRX250X-31HN6760.book Page 96 Monday, May 7, 2018 11:08 AM

Summary of Contents for Sportrax 250X 2019
































































































































































































































Search results

Summary of Contents for Sportrax 250X 2019

Reviews:

Related manuals for Sportrax 250X 2019

Brands by name

Popular brands

Honda Sportrax 250X 2019, Owner'S Manual

Search results

Summary of Contents for Sportrax 250X 2019

Reviews:

Related manuals for Sportrax 250X 2019

Brands by name

Popular brands