Honda RIDGELINE 2017 Owner'S Manual Download Page 145

Page: 145 / 611

Continued

143

Operating the Switches Around the Steering Wheel

ENGINE START/STOP Button

Co
ntrols

If you leave the vehicle for 30 to 60 minutes with the shift lever in

(

and the power

mode in ACCESSORY, the vehicle automatically goes into the mode similar to
VEHICLE OFF (LOCK) to avoid draining the battery.

When in this mode:
The steering wheel does not lock.
You cannot lock or unlock doors with the remote transmitter or the smart entry
system.

Press the

ENGINE START/STOP

button to switch the mode to VEHICLE OFF (LOCK).

If you open the driver’s door when the power mode is set to ACCESSORY, a warning
beep sounds.

■

Automatic Power Off

■

Power Mode Reminder

ENGINE START/STOP Button

If the power mode does not change from VEHICLE
OFF to ACCESSORY, press the

ENGINE START/STOP

button while moving the steering wheel left and
right. The steering wheel will unlock, allowing the
mode to change.

Do not leave the power mode in ACCESSORY or ON
when you get out.

Canadian models

Summary of Contents for RIDGELINE 2017



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RIDGELINE 2017

Reviews:

Related manuals for RIDGELINE 2017

Brands by name

Popular brands

Honda RIDGELINE 2017, Owner'S Manual

Search results

Summary of Contents for RIDGELINE 2017

Reviews:

Related manuals for RIDGELINE 2017

Brands by name

Popular brands