Honda RIDGELINE 2017 Owner'S Manual Download Page 302

Page: 302 / 611

General Information on the Audio System

Recommended CDs

300

Features

■

Protecting CDs

Follow these precautions when handling or storing CDs:

•

Store a CD in its case when it is not being played.

•

When wiping a CD, use a soft clean cloth from the center to the outside edge.

•

Handle a CD by its edge. Never touch either surface.

•

Never insert foreign objects into the CD player.

•

Keep CDs out of direct sunlight and extreme heat.

•

Do not place stabilizer rings or labels on the CD.

•

Avoid fingerprints, liquids, and felt-tip pens on the CD.

Protecting CDs

NOTICE

Do not insert a damaged CD. It may be stuck inside
and damage the audio unit.

Examples:

●

Damaged CDs

Bubbled/
Wrinkled

With Label/
Sticker

Using
Printer Label
Kit

Sealed

With Plastic Ring

●

Poor quality
CDs

Chipped/
Cracked

Warped

Burrs

●

Small CDs

3-inch
(8-cm)
CD

●

Bubbled, wrinkled, labeled, and
excessively thick CDs

Summary of Contents for RIDGELINE 2017



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RIDGELINE 2017

Reviews:

Related manuals for RIDGELINE 2017

Brands by name

Popular brands

Honda RIDGELINE 2017, Owner'S Manual

Search results

Summary of Contents for RIDGELINE 2017

Reviews:

Related manuals for RIDGELINE 2017

Brands by name

Popular brands