4.
Place a drain pan under the drain bolt
and oil plug.
5.
Remove the oil fill cap/dipstick, drain bolt
and sealing washer to drain the oil.
6.
Remove the oil plug, O-ring, spring and
oil strainer screen and let the remaining
oil drain out.
u
Discard the oil at an approved
recycling centre.
7.
Clean the oil strainer screen.
8.
Check that the oil strainer screen and
sealing rubber are in good condition.
9.
Replace the O-ring and apply a thin coat
of engine oil to the new O-ring before
installing it.
10.
Install the oil strainer screen, spring and
oil plug and tighten.
Torque:
20 N·m (2.0 kgf·m, 15 lbf·ft)
20180803173345_32K40L220_eng_BOOK Page 93 Friday, August 03 2018 17:38:27 JST
Engine Oil
u
Changing Engine Oil, Cleaning Strainer Screen
Maintenance
90
Sealing washer
Drain bolt
Oil plug
O-ring
Oil strainer screen
Spring
