background image

A Few Words About Safety

Your safety, and the safety of others, is very

important. Operating this scooter safely is an

important responsibility.

To help you make informed decisions about

safety, we have provided operating

procedures and other information on safety

labels and in this manual. This information

alerts you to potential hazards that could

hurt you or others.

Of course, it is not practical or possible to

warn you about all hazards associated with

operating or maintaining a scooter. You must

use your own good judgement.

You will find important safety information in a

variety of forms, including:

Safety labels on the scooter

Safety Messages preceded by a safety alert

symbol   and one of three signal words:

DANGER, WARNING, or CAUTION.

These signal words mean:

3

DANGER

You WILL be KILLED or SERIOUSLY

HURT if you don’t follow instructions.

3

WARNING

You CAN be KILLED or SERIOUSLY

HURT if you don’t follow instructions.

3

CAUTION

You CAN be HURT if you don’t follow

instructions.

Other important information is

provided under the following titles:

NOTICE

Information to help you avoid

damage to your scooter, other

property, or the environment.

20180803173345_32K40L220_eng_BOOK Page 3 Friday, August 03 2018 17:38:27 JST

Summary of Contents for NSS125AD
























































































































































Reviews: