Maintenance Fundamentals
82
Mainten
a
nce
❙
Cleaning and Lubricating
After inspecting the slack, clean the chain and
sprockets while rotating the rear wheel. Use a
dry cloth with chain cleaner designed
specifically for O-ring chains, or neutral
detergent. Use a soft brush if the chain is dirty.
After cleaning, wipe dry and lubricate with the
recommended lubricant.
Do not use a steam cleaner, a high pressure
cleaner, a wire brush, volatile solvent such as
petrol and benzene, abrasive cleaner, chain
cleaner or lubricant NOT designed specifically
for O-ring chains as these can damage the
rubber O-ring seals.
Avoid getting lubricant on the brakes or tyres.
Avoid applying excess chain lubricant to prevent
spray onto your clothes and the motorcycle.
Pro Honda HP is a pre-mixed solution of
antifreeze and distilled water.
A concentration of antifreeze below 40% will
not provide proper corrosion and cold
temperature protection.
Recommended lubricant:
Drive chain lubricant designed specifically
for O-ring chains
If not available, use SAE 80 or 90 gear oil.
Recommended Coolant
Concentration:
50% antifreeze and 50% distilled water
16 NC750XA XD-42MKA8000.book 82 ページ ２０１５年９月１６日 水曜日 午後１２時３９分
Summary of Contents for NC750XA
Page 1: ......
Page 53: ...49 Operation Guide 16 NC750XA XD 42MKA8000 book 49 ページ ２０１５年９月１６日 水曜日 午後１２時３９分 ...
Page 166: ...1 1 ...
