Tyre Puncture
u
Removing Wheels
132
Tr
ou
bles
hoo
ting
3.
Adjust the drive chain.
2
P. 107
4.
Install and tighten the rear axle nut.
5.
Tighten the drive chain adjusting nuts
lightly, then hold the adjusting nuts and
tighten the lock nuts.
6.
After installing the wheel, apply the brake
pedal several times, then recheck the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
7.
Install the parking brake caliper and
tighten the mounting bolts.
u
Take care to prevent the brake caliper
from scratching the wheel during
installation.
u
Use new mounting bolts when
installing the parking brake caliper.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Torque:
98 N·m (10.0 kgf·m, 72 lbf·ft).
Torque:
21 N·m (2.1 kgf·m, 15 lbf·ft).
Torque:
31 N·m (3.2 kgf·m, 23 lbf·ft).
NOTICE
When installing the brake caliper into position, carefully
fit the brake disc between the pads to avoid scratching
them.
NC750XD
16 NC750XA XD-42MKA8000.book 132 ページ ２０１５年９月１６日 水曜日 午後１２時３９分
Summary of Contents for NC750XA
Page 1: ......
Page 53: ...49 Operation Guide 16 NC750XA XD 42MKA8000 book 49 ページ ２０１５年９月１６日 水曜日 午後１２時３９分 ...
Page 166: ...1 1 ...
