Selecting the setting mode:
a
Turn the ignition switch to the ON position.
b
Press and hold the SEL button and SET
button until the ON/OFF setting display
changes.
c
Press the SEL button until the desired setting
mode is displayed. When the SEL button is
pressed, the setting mode will be changed.
d
When the SET button is pressed, each
setting mode will be changed.
To return to the ordinary display from the
setting mode:
●
The SEL button and/or SET button is not
pressed for about 30 seconds.
●
Turn the ignition switch to the OFF
position, and then to the ON position.
●
Press and hold SEL button and SET
button.
While operating settings, each setting will be
cancelled if the SET button is not pressed.
Operation Guide
37
Continued
