Honda NC750X Manual Download

Page: 30 / 183

Reserve tripmeter (only when reserve fuel mode)

Distance ridden since the 1st (E) segment of the fuel gauge and “RES” start

flashing.

The “RES” will flash faster when the fuel decreases further.

When the fuel gauge is near the 1st (E) segment or flashes, fill fuel promptly.

When “----.-” is displayed, go to your dealer for service.

Reserve fuel consumption (only when reserve fuel mode)

Fuel consumption since the 1st (E) segment of the fuel gauge and “RES” start flashing.

The “RES” will flash faster when the fuel decreases further.

When the fuel gauge is near the 1st (E) segment or flashes, fill fuel promptly.

When “---.-” is displayed, go to your dealer for service.

Operation Guide

Instruments

(Continued)

Summary of Contents for NC750X
























































































































































































Search results

Summary of Contents for NC750X

Reviews:

Related manuals for NC750X

Brands by name

Popular brands

Honda NC750X, Manual

Search results

Summary of Contents for NC750X

Reviews:

Related manuals for NC750X

Brands by name

Popular brands