Honda Motorcycle & Scooter India Pvt. Ltd.
48
NAVI
(1) Oil Strainer Screen Cap
(1)
ENGINE OIL STRAINER SCREEN
1. To drain the oil, remove the oil filler
cap/ dipstick, oil drain bolt and sealing
washer (page 47).
2. Remove the “Oil Strainer Screen Cap” (1),
“Spring” (2) and “Oil Strainer Screen” (3).
Oil Strainer Screen Cap Torque:
20 N.m (2.0 kgf.m, 14 lbf.ft)
3. Clean the oil strainer screen.
4. Check that the oil strainer screen,
sealing rubber and “O-ring” (4) are in
good condition.
5. Install the oil strainer screen spring,
O-ring and oil strainer screen cap.
6. Fill the crankcase with the recommended
grade oil;
0.7L (0.7 US qt, 0.6 Imp qt)
7. Reinstall the oil filler cap/dipstick.
8. Start the engine and let it idle for 3-5
minutes.
(2) Spring
(3) Oil Strainer Screen
(4) O-ring
(2)
(4)
(3)
