Honda Motorcycle & Scooter India Pvt. Ltd.
12
NAVI
(1) 1st Adjusting Nut
(2) Front Brake Arm
(3) 2nd Adjusting Nut
(4) Joint B
(5) Slider B Joint
(6) Joint A
(7) Slider A Joint
Adjustment:
Front brake:
During adjustment of 1st adjusting nut,
2nd adjusting nut should be in loose
condition.
Numeric ‘1’ & ‘2’ is embossed on brake
arm.
NOTICE
1. Check the free play of front brake lever.
Free Play: 10-20 mm (0.39-0.79 in)
2. If free play is 20 mm or more, turn “1st
Adjusting Nut” (1) to make the front
brake lever free play within 10~20 mm.
3. Push the “Front Brake Arm” (2) by
hand “(Push direction
)” and turn
the “2nd Adjusting Nut” (3) to make a
gap between “Joint B” (4) and “Slider B
Joint” (5) greater than zero & less than
1 mm (at ‘2’ embossed side).
4. Further confirm that there is no gap
between “Joint A” (6) and “Slider A
Joint” (7) (at ‘1’ embossed side).
5. After adjustment make sure that slider
A joint and slider B joint properly intact
at both side of brake arm slots.
1 mm max.
“Push direction”
(6)
(4)
(5)
(2)
(7)
(5)
(3)
(7)
(1)
6. Apply the brake several times and check
for free wheel rotation after the brake
lever is released.
