4
HONDA DIGITAL SPEEDOMETER (E) 87998-ZY3-8100
Dual Outboard Motor Operation
The digital speedometer must be connected to both motors to
provide both starboard “S” and port “P” functions. The “Fuel
Integration Meter (TTL)”, “Fuel Economy Meter (ECO)”, and
“Fuel Flow Meter (FLOW)” can be selected for each outboard
motor. Select “S”, “P”, or “S&P” by pressing the Set switch.
STARBOARD side outboard motor
(Right side of boat)
PORT side outboard motor (Left side of boat)
S&P Total of both motors
S
P
S & P
The “Volt Meter (BATT)” and “Water Separator Indicator” will
only display information for one outboard motor.
SPEEDOMETER
WATER SEPARATOR
INDICATOR
TRIPMETER
(TRIP)
FUEL INTEGRATION
METER (TTL)
SET SWITCH
MODE SWITCH
FUEL ECONOMY
METER (ECO)
FUEL FLOW
METER (FLOW)
FUEL LEVEL METER
VOLT METER
(BATT)
Speedometer
Fuel Level Meter
Shows the speed of the boat on the water.
Shows the amount of fuel left in the fuel tank that it is connected to.
The fuel reading can be affected by the position of the sensor in the fuel tank and the attitude of the
boat in the water. Operation with bow-up trim or continuous turning can give incorrect readings.
•
When all block bars light, this indicates that the fuel tank is full. The lowermost block bar will
blink when the fuel level is low.
•
The block bars will not light or blink when the digital speedometer’s fuel meter is not used.
S
P
DIGI-SPEED_E
5/14/04, 10:31 AM
4
