Honda HRX476C Owner'S Manual Download

Page: 19 / 24

19 EN

LOADING THE LAWNMOWER

CAUTION:

• To prevent losing control of or damaging the lawnmower, do not

use the drive system when going up or down a loading ramp.

• To prevent damaging the drive system, do not engage the clutch

when the lawnmower is rolling backwards.

• Transport the lawnmower in normal horizontal position with its

4 wheels flat on the vehicle platform.

• We recommend that you use a loading ramp or that you get

someone to help you load and unload the lawnmower.

• Adjust the loading ramp so that it is inclined at an angle of less

than 15° (26%).

• When transporting the lawnmower, immobilise it using straps and

place chocks under the wheels.

• The straps must not touch the following parts of the lawnmower:

throttle lever, cutting-means control lever, gas tank and all the

control cables.

USEFUL INFORMATION

FIND AN AUTHORIZED DEALER

Please refer to the European Internet site:
http://www.honda-eu.com

CURRENT PARTS, OPTIONAL ATTACHMENT AND

CONSUMABLES

To buy one of the original parts listed below, or any other part,
please contact an authorized Honda dealer.

For your safety, it is strictly prohibited to
install any other attachment than the ones
listed above and especially designed for
your lawnmowers' model and type.

15° (26%) max.

HRX476C

HYE, VKE, VYE

QYEJ

Current parts

[1]

Grass catcher 81320-VK8-J50 81320-VK8-003 Grass catcher only

(without frame)

[2]

Rear wheel

42710-VK8-J50

[3]

Air filter

17211-Z8B-901

Filter paper

[4]

Front wheel

44710-VK8-J50 44700-VK8-D00

[5]

Spark plug

98079-55846

NGK (brand):

BPR5ES (model)

[6]

Standard

cutting means

72511-VK8-J50 72511-VK8-000 Requires use of a

dynamometric key

[7]

72531-VK8-J50

[8]

Recoil starter

rope

28462-Z0L-V71

Ask your Honda

dealer to replace

these

Consumables

[9]

Engine oil

08221-888-061HE

SAE 10W30, 0.6



Oil for 4-stroke

engines

[2]

[6]

[9]

[8]

[3]

[4]

[5]

[7]

[1]

SAFETY

C23

3RVK87300.book Page 19 Wednesday, August 8, 2018 11:26 AM

Summary of Contents for HRX476C

























Search results

Summary of Contents for HRX476C

Reviews:

Related manuals for HRX476C

Brands by name

Popular brands

Honda HRX476C, Owner'S Manual

Search results

Summary of Contents for HRX476C

Reviews:

Related manuals for HRX476C

Brands by name

Popular brands