Honda HRR216VKA K10, Manual, Page: 125 / 183

10-16
CAM PULLEY/CRANKSHAFT/PISTON/ CYLINDER BLOCK HRR216VKA
PISTON RING WIDTH INSPECTION
PISTON RING SIDE CLEARANCE INSPECTION
PISTON RING END GAP INSPECTION
Use the top of the piston to position the ring horizontally in the
cylinder.
NOTICE
Do not hone the cylinder when replacing the piston rings.
PISTON PIN O.D. INSPECTION
Standard Service limit
Top ring 0.93 ~ 0.95 mm
(0.036 ~ 0.037 in)
0.91 mm
(0.035 in)
Second ring 0.97 ~ 0.99 mm
0.038 ~ 0.039 in)
0.95 mm
(0.037 in)
Standard Service limit
Top ring 0.055 ~ 0.089 mm
(0.002 ~ 0.004 in)
0.150 mm
(0.006 in)
Second ring 0.015 ~ 0.049 mm
(0.0006 ~ 0.0019 in)
0.150 mm
(0.006 in)
Standard Service limit
Top ring 0.20 ~ 0.35 mm
(0.008 ~ 0.014 in)
1.00 mm
(0.040 in)
Second ring 0.35 ~ 0.50 mm
(0.014 ~ 0.020 in)
1.00 mm
(0.040 in)
Oil ring 0.20 ~ 0.70 mm
(0.008 ~ 0.030 in)
1.00 mm
(0.040 in)
Standard Service limit
13.000 mm (0.5118 in) 12.954 mm (0.5100 in)