Honda HRN536CVKEA, Owner'S Manual

Page: 17 / 132

17
ENGLISH
VIBRATION
MOWING AND CATCHING PROBLEMS
SPECIFICATIONS
Possible Cause Correction
Grass and debris lodged under
the cutting-means enclosure Clean out the cutting-means enclosure
(page 11).
Cutting means loose, bent,
damaged, or unbalanced by
improper sharpening Tighten loose cutting-means bolts
(page 14). If cutting means are found to
be bent or damaged, take the
lawnmower to an authorized Honda
servicing dealer for inspection.
Mechanical damage, such as a
bent crankshaft Take the mower to an authorized
Honda servicing dealer or refer to the
shop manual for repair.
Possible Cause Correction
Mower is moving too fast for lawn
conditions Apply less pressure to the Smart Drive
control or push slower.
Cutting height adjustment levers
set at different positions Set both levers at the same cutting
height position (page 8).
Grass catcher overfilled or
clogged Empty the grass catcher. Wash the
grass catcher if it is clogged with dirt
(page 14).
Cutting-means enclosure is
clogged Clean out the cutting-means enclosure
(page 11).
Cutting means dull, worn, or
damaged Sharpen or replace the cutting means if
necessary (page 14).
MODEL HRN536C
TYPE VKEA VYEA
DESCRIPTION CODE MANA
GENERAL
Length
1,550 mm
Handlebar height
1,035 mm
Mass (ISO5395)
36.0 kg 39.9 kg
Width
575 mm
Cutting width
530 mm
Cutting height adjustments
27 mm, 39 mm, 51mm,
64 mm, 76 mm, 88 mm, 100 mm
Grass catcher capacity
70 L
Sound pressure level at
operator’s ears (According
to EN ISO 5395-1:2013)
85 dB(A)
Uncertainty
1 dB(A)
Sound power level
measured (According to
2000/14/EC directive)
96 dB(A)
Uncertainty
1 dB(A)
Sound power level
guaranteed (According to
2000/14/EC directive)
98 dB(A)
Vibration transmitted
(According to EN ISO
5395-1:2013)
5.0 m/s
2
5.4 m/s
2
Uncertainty
0.5 m/s
2
ENGINE
Model
GCV170
Type
4-stroke, single cylinder, vertical shaft
Displacement
166 cm
3
Bore and stroke
60 x 59 mm
Cooling
Forced air
Lubrication
Splash and spray
Compression ratio
8.0:1
Maximum speed
2,950 min
-1
Nominal power
3.2 kW
Ignition system
Transistorized magneto
Spark plug
NGK: BPR5ES
Spark plug gap
0.7 ~ 0.8 mm
Air cleaner
Dry element type
Recommended fuel
Unleaded petrol with a research octane rating of
91 or higher
Fuel tank capacity
0.91 L
Recommended oil
SAE 10W-30, API SN or later
Engine oil capacity
0.40 L
* Refill amount: 0.35 ~ 0.40 L
Carbon dioxide (CO2)
emissions **
Please refer to the CO2 values of the Honda
engine at www.honda-engines-eu.com/co2
* Actual amount will vary due to residual oil in the engine. Always use the
dipstick to confirm the actual level (see page 7).
** This CO2 measurement results from testing over a fixed test cycle under
laboratory conditions of a(n) (parent) engine representative of the engine
type (engine family) and shall not imply or express any guarantee of the
performance of a particular engine.
DRIVE
Type
Variable speed Smart Drive
Engine to transmission
V-belt
Main clutch
Slipping belt type
Mower speed
0 ~ 1.75 m/s
+0
–100