Honda GXV50, Owner'S Manual

Page: 14 / 48

× ×
× ×
× ×
− −
− −
− −
× ×
×
−
−
±
±
±
ENGLISH
Specifications
Descriptive Term
Replacement Parts
Maintenance
Air Index
Applicable to Emissions Durability
Period
Tuneup Specifications
MAINTENANCE ITEM SPECIFICATION
(PTO shaft S type)
14
249 286 225 mm
(9.8 11.3 8.9 in)
5.2 kg (11.5 lbs)
49 cm (3.0 cu-in)
[41.8 36 mm (1.65 1.42 in)]
Moderate
The emission control systems on your Honda engine were
designed, built, and certified to conform with EPA, California and
Canadian emission regulations. We recommend the use of
genuine Honda parts whenever you have maintenance done.
These original-design replacement parts are manufactured to the
same standards as the original parts, so you can be confident of
their performance. The use of replacement parts that are not of the
original design and quality may impair the effectiveness of your
emission control system.
A manufacturer of an aftermarket part assumes the responsibility
that the part will not adversely affect emission performance. The
manufacturer or rebuilder of the part must certify that use of the
part will not result in a failure of the engine to comply with
emission regulations.
Follow the maintenance schedule on page . Remember that this
schedule is based on the assumption that your machine will be
used for its designed purpose. Sustained high-load or high-
temperature operation, or use in unusually wet or dusty conditions,
will require more frequent service.
An Air Index Information hang tag/label is applied to engines
certified to an emission durability time period in accordance with
the requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability
to compare the emissions performance of available engines. The
lower the Air Index, the less pollution.
The durability description is intended to provide you with
information relating the engine’s emission durability period. The
descriptive term indicates the useful life period for the engine’s
emission control system. See your
Emission Control System
Warranty for additional information.
50 hours [0 65 cm (0 65 cc)]
125 hours [greater than 65 cm (65 cc)]
125 hours [0
65 cm (0 65 cc)]
250 hours [greater than 65 cm (65 cc)]
300 hours [0
65 cm (0 65 cc)]
500 hours [greater than 65 cm (65 cc)]
Intermediate
Extended
The Air Index Information hang tag/label must remain on the
engine until it is sold. Remove the hang tag before operating the
engine.
Length Width
Height
Dry weight
Engine type
Displacement
[Bore
Stroke]
Max. output
Max. torque
Engine oil capacity
Fuel tank capacity
Fuel consumption
Cooling system
Ignition system
PTO shaft rotation
1.8 kW (2.5 PS, 2.5 bhp) at 7,000 rpm
3.04 N·m (0.31 kgf·m, 2.2 lbf·ft) at
4,500 rpm
0.25 (0.26 US qt , 0.22 Imp qt)
0.5 (0.13 US gal , 0.11 Imp gal)
340 g/kWh (250 g/PSh, 0.55 lb/hph)
Forced air
Transistorized magneto
Counterclockwise
0.60 0.70 mm
(0.024 0.028 in)
Refer to page: 9
See your
authorized
Honda dealer
No other adjustments needed.
Spark plug gap
Idle speed
Valve clearance
(cold)
Other
specifications 2,500 200 rpm
IN: 0.08 0.02 mm
EX: 0.11 0.02 mm
4-stroke, overhead valve, single cylinder
6
05/05/07 11:06:19 32Z4D600_014