Taking Care of the Unexpected
223
If the Transmission Is Not
Functioning Properly
If the ATV does not move, even through “–” is not blinking in the
gear position indicator:
If your ATV won’t move, it is possible the transmission system has
malfunctioned. Use the following procedure to manually over-ride
the clutch of the transmission.
1. Shift the transmission into 2nd gear.
2. Apply the parking brake (page 49).
3. Turn the ignition switch to the OFF (
w
) position.
4. Loosen the screw (1) and release the lock plate (2).
5. Locate the emergency valve access hole (4) inside the left front
fender. Using a screwdriver, turn the emergency valve (3) all the
way in. With the engine running, slowly open the throttle to
move the ATV forward.
6. See your dealer as soon as possible.
When the battery is low (or dead):
• See
If the Battery Is Low (or Dead)
, page 238.
(2)
(1) screw
LEFT FRONT
LEFT SIDE
(2) lock plate
(3) emergency valve
(4) emergency valve access hole
(1)
(3)
(4)
19 TRX500FA6 FA7 (U)-32HR68400.book Page 223 Wednesday, May 16, 2018 10:58 AM
Summary of Contents for FOURTRAX RUBICON 2018
