Servicing Your Honda
151
Front Final Gear Oil
1. Park your ATV on a firm, level surface.
2. Place an oil drain pan under the oil drain bolt (1).
3. Remove the oil fill cap (2), O-ring (3), drain bolt and sealing
washer (4).
4. After the oil has completely drained, reinstall the drain bolt with
a new sealing washer and tighten it to the specified torque:
12 N·m (1.2 kgf·m, 9 lbf·ft)
5. Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 214).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
6. Fill the front final gear case with the recommended oil.
325 cm
3
(11.0 US oz, 11.4 Imp oz)
Make sure the oil level is at the lower edge of the oil fill inspection
hole (5).
7. Coat a new O-ring with grease and install it into the fill cap
groove and tighten it to the specified torque:
12 N·m (1.2 kgf·m, 9 lbf·ft)
FRONT
(1) oil drain bolt
(4) sealing washer
(2) oil fill cap
(5)
(3) O-ring
(5) oil fill inspection hole
(1)
(4)
(2)
(3)
19 TRX500FA6 FA7 (U)-32HR68400.book Page 151 Wednesday, May 16, 2018 10:58 AM
Summary of Contents for FOURTRAX RUBICON 2018
