Honda FourTrax Recon TRX250TM 2019 Owner'S Manual Download Page 132

Page: 132 / 225

Servicing Your Honda

122

Brakes

2. Remove the inspection hole plug (2).
3. Measure the lining thickness (3) on both front wheels:

If either lining is worn beyond the limit, both brake shoes must be
replaced by your dealer.

4. If the brake lever freeplay and the brake shoe lining thickness are

within the recommended limits, reinstall the inspection hole
plugs, seating them into the inspection hole as shown.

5. If the brake lever freeplay is excessive but the linings are not worn

beyond the service limit, adjust the brake lining clearance.

Standard:

0.16 in (4.0 mm)

Service Limit:

0.04 in (1.0 mm)

(4)

(2) inspection hole plug

(3) lining thickness

(4) front brake drum

(5) front wheel rim

(3)

(5)

(2)

19 TRX250TM-31HS0630.book Page 122 Thursday, April 5, 2018 3:37 PM

Summary of Contents for FourTrax Recon TRX250TM 2019


































































































































































































































Search results

Summary of Contents for FourTrax Recon TRX250TM 2019

Reviews:

Honda FourTrax Recon TRX250TM 2019, Owner'S Manual, Page: 132 / 225

Search results

Summary of Contents for FourTrax Recon TRX250TM 2019

Reviews: