Honda FourTrax Recon TRX250TM 2019 Page 68 Owner'S Manual Download

Page: 68 / 225

Basic Operation & Riding

Riding in Reverse

NOTICE

Your ATV may be equipped with a reverse speed limiter, which helps
the vehicle to maintain a safe speed while riding in reverse gear.

6. Release the rear brake lever/parking brake lever.
7. Open the throttle gradually and ride slowly. Do not open the

throttle suddenly or make abrupt turns.

8. To stop, close the throttle and gradually apply both the front and

rear brakes. Do not abruptly apply the rear brake alone.

9. To shift out of reverse and into neutral, raise the shift lever one

stroke to shift into “N” (neutral) gear (the neutral indicator is
on.).

WARNING

WARNING

Applying only the rear brake abruptly when
operating in reverse gear could cause the
front wheels to lift off the ground and the
ATV could overturn backwards.

Carefully apply both the front and rear brakes
when stopping in reverse gear.

19 TRX250TM-31HS0630.book Page 58 Thursday, April 5, 2018 3:37 PM

Summary of Contents for FourTrax Recon TRX250TM 2019


































































































































































































































Search results

Summary of Contents for FourTrax Recon TRX250TM 2019

Reviews:

Related manuals for FourTrax Recon TRX250TM 2019

Brands by name

Popular brands

Honda FourTrax Recon TRX250TM 2019, Owner'S Manual

Search results

Summary of Contents for FourTrax Recon TRX250TM 2019

Reviews:

Related manuals for FourTrax Recon TRX250TM 2019

Brands by name

Popular brands