110
Indicates a strong possibility that serious injury or
death may result if instructions are not followed.
Running the engine with improper oil level can cause serious engine
damage.
While reading this manual, remember:
2.0
(2.1 US qt , 1.8 Imp qt)
25 N·m (2.5 kgf·m , 18 lbf·ft)
Check that the drain plug sealing washer is in good condition, then
reinstall the oil drain plug securely. If necessary, replace the
sealing washer.
Oil drain plug torque:
Fill the crankcase with the recommended oil approximately:
Reinstall the oil filler cap.
Start the engine and let it idle for 5 minutes.
Stop the engine and after a few minutes, check the oil level. Make
sure the oil is between the upper and lower level marks on the
dipstick.
If necessary, add more oil but do not overfill.
If a torque wrench was not used for installation, see your authorized
Honda dealer before operating the vehicle to verify proper assembly.
To protect the environment, please dispose of used engine oil
properly. We suggest you place used oil in a sealed container and
take it to your local service station for reclamation. Do not put it in
the trash or pour it on the ground.
10.
11.
7.
8.
9.
01/04/28 16:40:06 3CHN5620_115
