Tire Puncture
u
Removing Wheels
114
Tr
ou
bles
hoo
ting
4.
Adjust the drive chain.
5.
Remove the bolts and muffler end cover.
6.
Install and tighten the rear axle nut.
7.
Install the muffler end cover and tighten
the bolts.
8.
Tighten the drive chain adjusting nuts
lightly, then hold the adjusting nuts and
tighten the lock nuts.
9.
After installing the wheel, apply the
brake pedal several times, then recheck
the wheel rotates freely. Recheck the
wheel if the brake drags or if the wheel
does not rotate freely.
10.
Install the parking brake caliper and
tighten the mounting bolts.
u
Take care to prevent the brake caliper
from scratching the wheel during
installation.
u
Use new mounting bolts when
installing the brake caliper.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Torque:
72 lbf·ft (98 N·m, 10.0 kgf·m).
Torque:
15 lbf·ft (21 N·m, 2.1 kgf·m).
Torque:
23 lbf·ft (31 N·m, 3.2 kgf·m).
NOTICE
When installing the brake caliper into position, carefully
fit the brake disc between the pads to avoid scratching
them.
CTX700D only