Drive Chain
u
Adjusting the Drive Chain Slack
92
Mainten
a
nce
5.
Turn both adjusting nuts an equal number
of turns until the correct drive chain slack
is obtained. Turn the adjusting nuts
clockwise to tighten the chain. Turn the
adjusting nuts counterclockwise to
provide more slack.
Adjust the slack at a point midway
between the front sprocket and the rear
wheel sprocket.
Check the drive chain slack.
6.
Check rear axle alignment by making sure
the chain adjuster index marks align with
the rear edge of the adjusting slots.
Both marks should correspond. If the axle
is misaligned, turn the right or left
adjusting nuts until the marks are aligned
and recheck chain slack.
7.
Remove the bolts and muffler end cover.
8.
Tighten the rear axle nut.
9.
Install the muffler end cover and tighten
the bolts.
Torque:
72 lbf·ft (98 N·m, 10.0 kgf·m).
Torque:
7 lbf·ft (10 N·m, 1.0 kgf·m).
Bolts
Muffler end cover
