Honda CRF250X 2007, Owner'S Manual & Competition Handbook

Page: 64 / 185

Clutch System
10.Apply grease to the rear brake pedal pivot bolt
sliding surface.
11. Install the rear brake pedal (12), dust seals
(11), washer (15) and pivot bolt (13) and
tighten the pivot bolt to the specified torque:
27 lbf·ft (36 N·m, 3.7 kgf·m)
Connect the brake pedal return spring (14) if
it was removed.
12. Insert the pin (16).
(11) dust seals (14) return spring
(12) rear brake pedal (15) washer
(13) pivot bolt (16) pin
13. Fill the crankcase with transmission oil (page
47).
Servicing Your Honda
59
(16)
(12)
(13)
(14)
(15)
(11)
5. Install the clutch pressure plate (7).
6. Install the five clutch springs and clutch
spring bolts (8).
7. Tighten the bolts in a crisscross pattern in two
or three steps to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
(7) clutch pressure plate
(8) clutch spring bolts/clutch springs
8. Install a new O-ring (9) in the groove of the
clutch cover (10).
9. Install the clutch cover by tightening the
clutch cover bolts to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
(9) O-ring (10) clutch cover
(8)
(7)
(10)
(9)
031-060.qxd 06.7.4 14:13 ページ59