manualshive.com logo in svg

Honda CRF250L, User Manual

Share
Download
Honda CRF250L User Manual Download Page 60

Engine Oil

 

u

 Changing Engine Oil & Filter

58

Maintenance

Changing Engine Oil & Filter

Changing the oil and filter requires special 
tools. We recommend that you have your 
motorcycle serviced by your dealer.

Use a new Honda Genuine oil filter or 
equivalent specified for your model.

1.

If the engine is cold, idle the engine for 3 
to 5 minutes.

2.

Turn the ignition switch off, stop the 
engine and wait for 2 to 3 minutes.

3.

Park on a firm, level surface and lower 
the side stand.

4.

Place a drain pan under the drain bolt.

5.

Remove the oil fill cap, drain bolt, and 
sealing washer to drain the oil.

6.

Remove the oil filter cover, oil filter, 
spring and gasket by removing the oil 
filter cover bolts.

u

Discard the oil and oil filter at an 
approved recycling centre.

NOTICE

Using the wrong oil filter can result in serious damage to 
the engine.

Sealing washer

Drain bolt

13 CRF250L-32KZZB000.book  58 ページ  ２０１２年３月１４日　水曜日　午前１１時２３分

http://mototh.com

Summary of Contents for CRF250L



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands