Maintenance Fundamentals
47
continued
Maintenance
❙
Cleaning and Lubricating
After inspecting the slack, clean the chain and
sprockets while rotating the rear wheel. Use dry
cloth with chain cleaner designed specifically
for O-ring chains, or neutral detergent. Use a
soft brush if the chain is dirty.
After cleaning, wipe dry and lubricate with the
recommended lubricant. If not available, use
SAE 80 or 90 gear oil.
Do not use a steam cleaner, a high pressure
cleaner, a wire brush, volatile solvent such as
petrol and benzene, abrasive cleaner, chain
cleaner or lubricant NOT designed specifically
for O-ring chains as these can damage the
rubber O-ring seals.
Avoid getting lubricant on the brakes or tyres.
Avoid applying excess chain lubricant to prevent
spray onto your clothes and the motorcycle.
Pro Honda HP is a pre-mixed solution of
antifreeze and distilled water.
A concentration of antifreeze below 40 % will
not provide proper corrosion and cold
temperature protection.
Recommended lubricant:
Drive chain lubricant designed
specifically for O-ring chains.
Recommended Coolant
Concentration:
50 % antifreeze and 50 % distilled water
13 CRF250L-32KZZB000.book 47 ページ ２０１２年３月１４日 水曜日 午前１１時２３分
http://mototh.com
