Honda CRF110F 2019, Owner'S Manual

Page: 87 / 134

76
Throttle Limiter Activation:
You can reduce throttle grip movement.
1. Remove the M6 × 6 screw (1) from the
throttle housing.
2. Replace the M6 × 6 screw with throttle
stopper screw (2) provided and tighten it
fully.
When the M6 × 6 screw is installed, the
throttle can be fully opened.
When the throttle stopper screw is installed,
the throttle opening is restricted to
approximately 50% and the maximum
engine speed is limited.
Do not remove the screw except when
activating or deactivating the limiter.
Use only provided screws. Do not use any
other screw.
Never operate the motorcycle without
either the M6 × 6 screw or throttle stopper
screw installed as debris can enter the
housing and cause the throttle to bind.
(1) M6
×
6 screw
(2) Throttle stopper screw
(1)
(1)
(2)
19 CRF110F̲
32KYKB30
.book 76 ページ ２０１８年１０月１２日 金曜日 午前１０時３９分