Honda CR-V 1998 Reference Owner'S Manual Download Page 17

Page: 17 / 300

Protecting Adults

Position the belt as low as possible
across your hips. This lets your

strong pelvic bones take the force of

a crash and reduces the chance of

internal injuries.

Pull on the loose end of the belt for a

snug but comfortable fit.

If a Seat Belt Doesn't Work Properly

If your seat belt does not seem to

work as it should, it may not protect

you in a crash. Anyone using an

inoperative seat belt can be seriously
injured or killed.

No one should sit in

a seat with an inoperative seat belt,

Have your Honda dealer check the

belt as soon as possible.

See page

for additional

information about your seat belt

system and how to take care of your

belts.

Driver and Passenger Safety

Summary of Contents for CR-V 1998













































































































































































































































































































Search results

Summary of Contents for CR-V 1998

Reviews:

Related manuals for CR-V 1998

Brands by name

Popular brands

Honda CR-V 1998, Reference Owner'S Manual

Search results

Summary of Contents for CR-V 1998

Reviews:

Related manuals for CR-V 1998

Brands by name

Popular brands